Antique table. |
HOW TO CLEAN VINTAGE WOODEN FURNISHINGS:
Timber is often a porous, normal stuff comprised of normal fibres which could extend, grow and take in air. This more mature wood gets, the greater these skin pores and fibres ease, allowing far more chance of humidity and soil to leak in their materials. Upon classic wood furniture, it is necessary to reduce the detrimental consequences regarding soil particles and humidity.
With regards to the finish off that's put with top covering in the wood to blemish or maybe close the idea, the furniture may well however take up almost any product or service or maybe humidity that's put on their surface.
This is why many classic dealers propose employing an oil-based solution rather than a new wax solution. Feel can in fact close soil into the wood although a great oil-based solution may ease the soil and see it towards the surface with regard to elimination.
REVERSING THE EFFECTS OF MOISTURE:
When moisture enters wood, it not only weakens the fibres by softening them, it can also leave unsightly white areas showing on the surface of your furniture. Depending on the severity of the damage, some of these white marks may be removed.
To begin, place a heavy piece of office-grade ink blotting paper from a stationery store like Office Max over the affected area. Iron on low heat to cause the excess moisture to be drawn into the very heavy, specialized paper. (This may not work on all moisture stains, but it’s worth a try.)
REMOVING DIRT:
Furniture that has been stored for many years will often have lots of dirt and grime both on and within its surfaces. Removing the dirt without scratching the delicate, aged wood is the secret. A shop-vac without any attachments on the hose can be used along with a paintbrush to take the large pieces of dirt off without leaving
scratches.
Next, a heavy layer of furniture oil should be generously spread over the furniture and allowed to sit on the stubborn areas to loosen dirt or sticky areas overnight. To apply, spread the furniture oil in the same direction as the grain of the wood with a soft paintbrush.
After it has been allowed to sit in oil overnight, place a clean, unwanted gym sock on your hand and gently massage the extra oil along the grain of the wood.
The sock allows your hand to sense and control the pressure of the rubbing while going over all areas of the furniture, including any carved or curved details.
Next rub the wood along the grain with discarded t-shirts (the soft, worn cotton will not scratch the surface) until all excess oil and grime is removed. This process can take a little time as you examine all problem areas closely.
REMOVING ODORS:
To remove smells from wooden drawers or cabinets, traditional methods can often be best. Using a mixture of coffee grounds and rice was a solution used in the early 20th Century by homemakers. Sprinkle dry coffee grounds into the drawer or cabinet, add grains of rice, and let this mixture sit for a week or more. (This can later be cleaned up easily with a shop-vac.)
Depending upon the strength of the smell, the process may need to be repeated. Stubborn smells, such as tobacco or mildew, may need the use of lemon oil or orange oil on a regular basis to gradually remove the odors over time.
About Kay:
Kay Davenport is an antiques collector and the creator of Antique Furniture, her personal hobby blog, which is focused on experiences related to antique furniture care and restoration. She helps her family and friends to learn how to restore and evaluate their antique pieces.
0 komentar:
Post a Comment